The new MultiDrain UV3 wastewater pumps for domestic use

MultiDrain UV3 S wastewater pump for the drainage of a laundry room

Activatable flushing openings in the UV3 keep the sump clean

Extensive accessories for the UV3 enable immediate mobile use

New stainless steel pump MultiDrain UV3

Pentair Jung Pumpen expands the MultiDrain range with a new wastewater pump

With the new UV3 series, Jung Pumpen is launching a new premium product in the field of wastewater pumps. Whether mobile or stationary, whether cold or hot aqueous media, the UV3 is an all-rounder. Useful features, which have been implemented through decades of experience of the manufacturer, distinguish the pump.

MultiDrain - a family with substance

With the UV300 and UV600 wastewater pumps, high-performance stainless steel versions already exist. With delivery heads of up to 27 m and flow rates of up to 43 m3/h, these are used for extreme flood events or for draining buildings with several basements.

UV3 - for domestic use

The "small" UV3 with a delivery height of 7 m and a delivery volume of 7 m3/h is designed for domestic use. It reliably pumps rainwater, greywater or wastewater with solids smaller than 10 mm from shafts, pools or flooded cellars. Due to its motor jacket cooling, the pump is very well suited for mobile applications. The vertical pressure outlet enables direct cooling of the motor, so that water with a temperature of up to 70 °C (158 °F) can be pumped even for short periods. With cooler media, the pump can operate continuously. Equipped with a swing check valve and a variable hose connection, it is quickly ready for use. With its vertical pressure outlet, it is also ideally suited for stationary operation.

The right version for every application

The UV3 is available in different versions. The UV3 S is designed for installation in sumps and has a float switch. For particularly narrow sumps (already from a diameter of 22 cm), the UV3 SF is suitable with a level control that sits close to the pump housing. A version without a float switch (UV3) is available for mobile use or for installation as a double system.

A pump for decades

The high quality of the pump is achieved, among other things, by generous dimensioning of the components used (e.g. seal, condenser). An oil chamber guarantees a long service life of the sealing elements. The UV3 has a screwed impeller that can be replaced if necessary. The electrical components can also be replaced.

Flushing devices that can be opened without tools ensure a clean sump during stationary operation. A ventilation opening that can be activated, which ensures a trouble-free start-up during stationary installation, rounds off the overall package.